EN
14365216.02 08/2020 EN/DE
Operating instructions magnetostrictive level transmitter, models FLM-CA, FLM-CM
9
3.7 Labelling, safety marks
Product label
Model
Model code
Serial number
Article number
Tag no.
Electrical data, IP ingress protection
Before mounting and commissioning the instrument, ensure you read the
operating instructions!
4. Transport, packaging and storage
4.1 Transport
Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
▶
When unloading packed goods upon delivery as well as during internal
transport, proceed carefully and observe the symbols on the packaging.
▶
With internal transport, observe the instructions in chapter 4.2 “Packaging
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
Level sensor FLM
Type:
Ser. No.:
Art. No.:
Tag. No.:
IP68
max. DC 15 ... 30 V
4 ... 20 mA
WIKA Alexander Wiegand SE & Co. KG
Alexander-Wiegand-Strasse 30
63911 Klingenberg
WIKA Alexander Wiegand SE & Co. KG
Alexander-Wiegand-Strasse 30
63911 Klingenberg
Level Sensor ???????
Type: ???-????????????????
????????????????
4-20 mA
TÜV 18 ATEX 225120 X
II 1/2 G Ex ia IIC T6…T3 Ga/Gb
II 1 D Ex ia IIIC T160°C Da
0637
Ui=<30V; Pi=<1W; li=<200mA; Ci=<10nF; Li=<20µH
Bj.:????
3. Safety / 4. Transport, packaging and storage
