5. Transport, packaging and storage
WIKA Operating Instruction, CPP4000-X
15
EN
14
15
54
60
.0
08
/20
16
GB
4.
Transport, packaging and storage
4.1
Transport
Check the model CPP4000-X hydraulic comparison test pump for any damage that may have been
caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
▶
When unloading packed goods upon delivery as well as during internal
transport, proceed carefully and observe the symbols on the packaging.
▶
With internal transport, observe the instructions in chapter 4.2 “Packaging and
storage”.
4.2
Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in installation
site, sending for repair).
Permissible conditions at the place of storage:
■
Storage temperature: -10 ... 50 °C
■
Humidity: 35 ... 85 % relative humidity (no condensation)
Avoid exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Potentially explosive environments, flammable atmospheres
■
Corrosive liquids
Store the model CPP4000-X hydraulic comparison test pump in its original packaging in a location
that fulfils the conditions listed above. If the original packaging is not available, pack and store the
instrument as described below:
1.
Wrap the instrument in an antistatic plastic film.
2.
Place the instrument, along with shock-absorbent material, in the packaging.
3.
If stored for a prolonged period of time (more than 30 days), place a bag, containing a desiccant,
inside the packaging.
