WIKA CTD9300 Series, Operating Instructions Manual

Page: 40 / 134

9037926
07/2015
Temperature Dry Well Calibrators CTD9300
3. Moduses and Functions
GB
40
WIKA Operating Instructions CTD9300 Rev. 1
This menu is used to set the control parameters.
3.1.3.3 Controler
Fig. 25: Control parameter set
The parameter set in the basic configuration is as follows (device-
dependent):
Control parameter CTD9300 -650
P0 1.00
P1 1.00000E-03
P2 1.00
P3 0.00
P4 1.00000E-01
CTD9300 -165
1.00
1.00000E-02
1.00
0.00
1.00000E-01
Where:
Control parameter Designation
P0 internal amplification
P1 adjustment of the disturbance variable
P2 time constant
P3 test parameter
P4 safety limit of the dynamic
Warning!
Ex works, the control parameters are set for an optimum
control behaviour.
The user should not edit these settings.