WIKA CPH7650, Operating Instructions Manual, Page: 39 / 144

39 WIKA operating instructions, model CPH7650
EN
14261987.02 01/2019 EN/DE
6. Commissioning, operation
5
CPH info
General CPH7650 instrument data
■
Calibration data for the electrical measuring inputs
■
Firmware number
■
Serial number of the instrument
⇒
For more information please refer to chapter 6.7.2 “SETUP additional menu items: CPH info”
6
Reference sensor
Data for the currently connected reference pressure sensor
■
Measuring range
■
Accuracy class
■
Pressure type of the sensor
■
Information in the event of reference sensor overpressure
■
Calibration data for the reference sensor
⇒
For more information please refer to chapter 6.7.3 “SETUP additional menu items: Reference
sensor”
7
Reference sensor list
List of the stored reference sensors that can be attached and are calibrated.
⇒
For more information please refer to chapter 6.7.4 “SETUP additional menu items: Reference
sensor list”
8
CPH configuration
■
Info: on rechargeable battery capacity
■
Setting options from: Menu language, system time/system clock, display brightness,
Powersave function (automatic energy saving mode; see chapter 6.7.5 “SETUP additional
menu items: CPH configuration”)
■
Input options:
- Ambient temperature during the calibration
- Height difference existing between the reference pressure sensor and test item (see
chapter 6.2 “Requirements for test assemblies with the CPH7650”).
⇒
For more information please refer to chapter 6.7.5 “SETUP additional menu items: CPH
configuration”
9
Interface
USB interface, incl. setting of the baud rate
⇒
For more information please refer to chapter 6.7.6 “SETUP additional menu items: Interface”
10
CLEAR CalProg
Delete all stored calibration data (clear and reset all memory space)
⇒
For further information, see chapter 6.7.7 “SETUP additional menu items: CLEAR CalProg”
11
CPH switch off
Switching off the model CPH7650 pressure calibrator
⇒
For more information please refer to chapter 6.5.2 “Switching the pressure calibrator off”