36
WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
c
d
e
f
g
a
b
h
Operating mode: CALIBRATION
In the
CALIBRATION
mode the data shown above the dashed dividing line is the same
as in the "
MEASURING
with test item" mode.
7. Commissioning, operation
a) Current measured value of the CPT6000 reference pressure sensor
b) Current measured value of the test item
c) Deviation between the test item and reference
d) Setpoint of the calibration
e) Actual value of the calibration
f) P-01: Test item No. 1;
<01>: Test step No. 1
g) ID no: IDENT number of the test item
h) Current value of the output signal of the test item
Pressure signal
(test item)
Electrical signal
(test item)
P
I/U
switchable