34
WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
Functions
CPH-Info
ReferenceSensor
Ref. Sensor-list
CPH-Configuration
Interface
CLEAR CalData
CPH switch off
Switching off
b
a
c
Following the status messages, the display returns to the screen for the last selected
operating mode (see following chapter 7.2.3 "Display contents of the operating modes").
7.2.2 Switching off the model CPH6000 ProcessCalibrator
The instrument is switched off using the
"CPH switch off"
menu item in the first
submenu. For this, press the
SETUP
key, select the
"CPH switch off"
menu item and
confirm using the
SELECT
button.
7. Commissioning, operation
7.2.3 Display contents of the operating modes
Operating mode: MEASURING
When a CPH6000 with a CPT6000 reference pressure sensor connected to it is first
switched on, the instrument (after displaying a brief status message) switches to
MEASURING
mode (see following picture).
Display:
MEASURING
with reference pressure sensor only (without test item)