16
WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
4. Design and function
4. Design and function
4.1 Short description
The model CPH6000 ProcessCalibrator combines the benefits of a compact hand-held
instrument with the precision of a laboratory calibration instrument. Thus everyday tasks
in the field, such as measuring, testing or calibration of pressure measuring instruments
(including certificate generation and testing pressure switches) become particularly
easy.
4.2 Scope of delivery
■
ProcessCalibrator model CPH6000
■
Battery charger
■
Test-cable set with various connectors
■
3.1 calibration certificate per DIN EN 10204
■
Choice of sensors
Cross-check scope of delivery with delivery note.
4.3 Electrical connections to the CPH6000
All electrical connections are located along the top edge of the CPH6000 (see picture
below).
WARNING!
Only original WIKA components should be connected to any of the
electrical connections. (Only the WIKA battery charger to the mains
input/charger socket; only WIKA test cable to the laboratory connectors
and only a WIKA RS-232 or USB connection cable to the interface
socket).
Mains supply /
charge socket
Interface USB/RS-232
Measuring input*
voltage
Voltage supply 24 V*
(activated via menu)
Measuring input*
current or pressure switch-test
* Connection: 4 mm socket