18
DE
Use
6.4 Switching the frontside LED on/off
›
There are LED ring lights at the front of the tool (Fig. 1/
6
), which can be switched on by
pressing the main switch.
›
When the main switch is activated, the lights are on. When the main switch is released,
the lights will turn off after 5 seconds.
›
When the battery is low, the frontside LED flashes blue. The battery is exhausted and the
tool needs to be charged.
6.5 Setting up the torque mode
1. To set up torque mode, press the forward direction button/torque selector (Fig. 4/
1
) for
2 seconds; see the
Torque selector
table.
2. Press again to change the torque.
6.6 Releasing the integrated bit magazine
1. Press the bottom of the tool to release the integrated bit magazine (Fig. 4/
3
). If the bit
magazine is extended, press again to close the bit magazine.
4VCordlessScrewdriver-DHT0002-EN-01
