Operating Manual
28
8. Service
8.1. Trouble-Shooting
Cause
Remedy
After switching on the
unit, the display shows
no light and the hot
plate does not react to
any input.
1. Ensure that the mains electricity plug is plugged into a
working socket outlet and check if the main switch is in
the “on” position.
2. Open the fuse holder of the power cord, which you can
find at the back of the instrument. If the fuse is damaged,
replace it with 4A / 220V (WH200D-1K), 8A / 220V
(WH200D-2K), 10A / 220V (WH200D-3K) fuse. Clean
the holder before your replacement.
3. If the fuse is not damaged and the malfunction cannot be
determined, please contact the WIGGENS support.
After switching on the
unit, the power switch
is lit up, but the hot
plate does not react to
any input.
1. This is probably a malfunction of the control board.
Please contact the WIGGENS support.
WIGGENS reserves the right to carry out technical modifications with
repairs for providing improved performance of the instrument.
8.2. Warranty
In accordance with
WIGGENS
warranty conditions, the warranty period is 24 months.
For claims under the warranty please contact your local dealer. You may also send the
