Operating Manual
12
can reach the flash point temperature of many chemicals
Do not plug or unplug power cord with wet hands. Such action can cause electric
shock.
Be aware of possible cable damage! Keep the connection cable away from the
heating zone!
3.3. For protection of the equipment
You have received a product designed for industrial and experimental use.
Nevertheless, avoid strikes to the housing, vibrations, damage to the
operating-element panel, and contamination.
Make sure that the mains power supply has low impedance to avoid any negative
effects on instruments being operated on the same mains.
Do not expose the unit to sunlight
Sudden drops may cause damage in the interior of the instrument.
Transport the instrument with care.
The device can be damaged when sucking in aggressive gases or vapor through the
installed ventilator!
Press the power button to interrupt the hot plate, rather than disconnect the main
power plug directly.
Ensure that the base plate is kept clean
Never operate the hot plates in wet areas!
Be aware of the potential danger of a fire outbreak due to overheating!
Press the power button to interrupt the hot plate, rather than disconnect the main
power plug directly.
4. Operating Procedures
4.1. Environmental Operating Conditions
The Hot Plate must operate in the following conditions:
Indoors
