WIGGENS WH200D-1K / WH200D-2K / WH200D-3K
17
11
SELECT Button
Press the SELECT Button to toggle between the operating
modes: Set Temp, Pro.Temp, OFF-Time, and WAIT-Time. The
LED light indicator will change accordingly.
12
Up Button
Press the Up Button to increase the temperature or time value
in the setting modes.
13
Down Button
Press the Down Button to decrease the temperature or time
value in the setting modes.
14
CLEAR Button
The button clears up all set values and sets them to 0. The
timer is set to continuous mode.
Note!
All WH series digital hot plates are use the totally same operation
method
Caution!
Do not use voltages that are higher or lower than 10% of the
voltage specified on the label, which is on the backside of the
instrument.
Keep the power cord and temperature sensor cable off of the hot
plate while heating.
Put the solution on the top plate before operating the instrument.
Heating corrosive liquids under poor ventilation hoods will
shorten the life of the electronic components inside the
instrument.
Upon the first heating operation, a particular smell and white
smoke can appear. This is normal. Put the instrument under a
