WIGGENS WH200D-1K / WH200D-2K / WH200D-3K
21
4.3.4 Operation of the Heater with a Temperature Sensor
1. Connecting the Temperature Sensor
Be sure to use the correct temperature
sensor
Connect the temperature sensor at the rear
of the hot plate
Make sure that the cable of the temperature
sensor is routed so that it cannot touch the
heating zone.
Immerse the temperature sensor into the
liquid min. 30 mm in depth.
Note!
In contrast to operation without temperature sensor, the hot
plate now features:
Set temperature range of 40°C ~ 300°C instead of 50°C ~
300°C.
Monitoring and control of the external temperature as measured
by the external temperature sensor
A bracket is available behind each hot-plate to attach a support rod.
An external temperature sensor can also be connected for precise
sample measurement and heating. See figures above. Please refer
to the Accessories section for ordering information.
