Wieland
podis
system
Manual V 1.03 / ref. no. 00.000.0059.0 / 28.03.2001
5.2.3
podis
MC2M
You require 1.5 mm
2
or 2.5 mm
2
round cables for the
motor control unit MC2M. The required number of cores
can vary between 3 cores + PE and 7 cores + PE,
depending on the motor that is used. Prefabricated
cables with
revos
MOT
plugs can be used. Ordering
details can be found in the appendix.
The following sketch indicates the connector pin
assignment of the motor feeder sockets. The upper
socket (X30) is assigned to motor 1, the lower socket
(X31) is assigned to motor 2. The connector pin
assignment is identical for both sockets.
Pin Brief
description Comment
1
L1 (U)
Motor phase voltage
2
L2 (V)
Motor phase voltage
3
L3 (W)
Motor phase voltage
4 n.c.
Unassigned
… n.c.
Unassigned
10 n.c.
Unassigned
PE PE
PE
connection
If a brake is present in the motor, a drive
circuit with 400 V AC must be designed.
If one of the two motors is not to be used,
the outgoing feeder should be sealed
appropriately. This can be carried out
with a corresponding sealed connector of
the
revos
MOT range.
Motor connection examples for
podis
MC2M
podis
MC2M
Connector pin assignment
of motor feeder sockets
X30, X31
CARE
X30 podis motor feeder connector
X31 podis motor feeder connector
Motor, without brake
without thermistor
4-core connecting cable
(3 cores + PE)
podis
MC2M
Asynchronous motor
without brake, without
thermistor
