3
podis CON flat cable
Wieland Electric GmbH | BA000369 (Rev. B) | 02/2016
15
Knife 95.350.0700.0 and combination pliers
Scratching: first transverse, then longitudinal
Scratch the flat cable as follows:
1x all around in the transverse direction and then 2x in the
longitudinal direction on both sides
The longitudinal cut should end shortly before the transverse
cut in order to prevent tearing
Scratching on the edges.
After scratching, tear open the edges from the front using a
pair of pliers.
Pull off the sheath on the torn edges
Tear the cable cleanly from below along the transverse
scratch.
Expose all conductors
1
2
3
4
5
6
7
8
