Terra Clean 100
11 Maintenance
10 | 2020
239 99 01
–
003
45
11.6.
Wheels and tyres
DANGER!
Risk of injury due to explosive bursting of the tyres.
➢
Always adhere to the recommended tyre pressure.!
➢
Never inflate the tyres over the recommended pressure.
➢
Do not heat the wheels or tyres or carry out welding on them.
➢
Never stand in front of or on the tyre. If available, use a safety cage.
Do not heat the wheels or tyres or carry out welding on them. Heating the tyres can lead to explosion-type tyre bursts as the
pressure in the tyre thereby becomes very high. Welding can lead to deformations or damage of the wheel.
When inflating the tyres, select a filling connection with a safety clip and an extension hose with sufficient length so that you
can stand to one side when inflating the tyres.
CAUTION!
Risk of accident during tyre fitting.
➢
Only carry out tyre installation if you have appropriate experience and equipment.
➢
Regularly check the tyre pressure: 1,5 bar
➢
Check wheels and tyres daily for low pressure, slits, bulges, damaged rims, missing wheel bolts or
–
nuts.
11.7.
Lubricating points
11.6.1
Lubrication
–
General information
WARNING!
Danger due to unsecured machine.
➢
Prior to performing any servicing, maintenance or cleaning work, shut down the engine and remove the
ignition key.
➢
Where required, lubricate more often than specified.
➢
Always keep all exposed machine parts, threaded spindles and guides lightly lubricated
➢
Apply a small amount of oil tot he chain.
➢
Before starting the machine aftre a longer standstill, lubricate and maintain the entire machine.
11.6.2
Lubricating greases
Designation
Specifications
Lubricating grease
MT47 (visc. 55)
Min. 3%
–
5% molybdenum sulphide
