Terra Clean 100
3 Safety instructions
10 | 2020
239 99 01
–
003
11
3.5.
Service life of the machine
•
The useful life of this machine depends on correct operation and maintenance, as well as the deployment and
operating conditions.
•
Continuous operational readiness and a long useful life of the machine can be achieved by following the instructions
and notes in these operating instructions.
•
Once the season is over, the machine should be checked thoroughly for wear and any other damage.
•
Damaged and worn components should be replaced before using the machine again.
3.6.
General safety instructions
•
In addition to the information provided in these Operating Instructions, please also observe generally applicable
safety and accident-prevention standards!
•
Familiarise yourself with all equipment and operating elements and their functions before starting work. Ensure
that all protective equipment has been properly installed.
•
In the working area, the user is responsible for the safety of other persons!
•
Before moving off, ensure that the immediate area of the machine is clear e.g. no children nearby. Ensure that
your visibility is not impaired!
•
Keep all persons clear of the danger zone of the machine!
•
For all operations the engine must be switched off and the ignition key must be removed.
•
Only use the attachment components designated for use with the attached equipment.
•
Observe permitted axle loads and axle load distribution. The tractor must be steerable.
•
The driving and operating properties of the tractor may be influenced by the attachment of the machine! Always
adapt your driving style to match the terrain and ground conditions. Special care should be taken when working
and turning on a slope.
•
For this work, please use your personal protective equipment (PSA) such as: gloves, goggles, ear protectors.
•
Special care should be taken when working and turning on a slope.
–
Danger of toppling
!
•
All safety devices must be assembled before initial operation of the machine.
•
Always keep the machine in a good condition. Improper changes to the machine impair its function, operational
reliability and service life
