All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
40
8.0. Maintenance
8.1. General Information
ATTENTION!
-
For all work, the device
must be hitched to the
tractor.
-
RISK OF INJURY
!
-
Only qualified personnel
are permitted to perform
maintenance, repair and
disassembly tasks.
-
Repair, maintenance and
cleaning work as well as
the elimination of
malfunctions should
principally be done only
with the drive switched off
and the engine shut off.
Withdraw ignition key .
-
The centrifugal mass may
cause the blower to run on.
Do not move too near to the
machine during this time.
Work can only be continued
when the device is at a
standstill.
-
Machine maintenance
involves not only
lubrication but also
cleaning. After completion
of work, the machine should
be washed and thoroughly
checked over.
-
Use
only original parts
.
Third-party parts often do
not match the required
quality and thus endanger
your safety. Moreover, the
sustained warranty and
recognition of justified
warranty claims can only be
guaranteed, if you
exclusively use
original
parts from Wiedenmann
.
We expressly point out to
you that non-original
parts that have not been
delivered by Wiedenmann
also have not been
approved and released by
Wiedenmann. The
installation and/or use of
such products may actually
have a negative impact on
the constructional
properties of your vehicle
and thus may affect the
active and/or passive
safety. Damages arising
from the use of non-
original parts are
excluded from the scope of
the manufacturer’s
liability.
-
Welding work on load-
bearing parts must be
carried out in accordance
with recognised welding-
technology methods.
-
Upon completion of
maintenance work,
reinstall all protective
devices.
