All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
38
7.0. Operation
7.1. General Information
ATTENTION :
The user of Megar Twister is
responsible for persons
inside the working area.
Never operate the Whisper
Twister without its safety
devices.
If you do operate the Mega
Twister without safety
devices, you expose yourself
and others to extreme danger.
Always check the immediate
surroundings when starting to
drive (be careful of
CHILDREN!).
Direct everyone out of the
danger zone before starting.
Switch off the drives
immediately if there are
people in the danger zone.
In order to avoid injury to
persons or damage to
equipment, care must be taken
when using the blow-out nozzle
on stony surfaces (e.g. rubble
and grit) to leave sufficient
free space for any flying
debris.
The power take-off shaft:
never switch on when the
motor is switched off
always switch off when
it is not required,
always switch off before
you lift up the Mega Twister
7.2. Switching on
The blower may not be
switched on under full motor
speed.
Notice!
When switching on the power
take-off shaft, reduce the
motor speed on idling mixture
to half and couple-in
carefully. Finally increase
the motor speed to the
desired speed (
max. 750 rpm
).
7.3. Blower wheel
If you identify wheel
imbalance, you must immediately
shut down the machine.
You must remove and balance the
blower wheel.
