All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
18
2.0. Assembly
2.3. Assembling the roller unit
The attachment points for the
roller unit are:
4 threaded holes (A)
2 holes (B)
Fix the bracket (C) on both
sides.
The hexagon screws (D) must be
inserted from below.
Use the bearings to fix both ends
of the roller (E), with two
hexagon screws (F) in each case,
in the front holes of the bracket
(C).
In the roller unit version, NO
fixed rollers are attached to the
support leg (G).
The stripping bowl (H) is fixed
to the bracket (C) a small
distance from the roller with the
remaining hexagon screws (J).
