All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification
23
2.0. Assembly
2.7. Attaching the blow-out nozzle
Hook the blow-out nozzle (A) on
with the slot on the locking
pin (B)
Push the shaft (C) from the
left into the bearing bushing.
NOTE:
On the left-hand side insert
1 spacer ring and on the
right-hand side insert
2 spacer rings between
the housing and the blow-out
nozzle.
Attach the blow-out nozzle
adjustment [mechanical (D),
electrical or hydraulic] to the
bolts (E) and secure with the
split pin (F).
