Kunststoffschweißtechnik
Starting and operating
Chapter 5
29.03.2011
Working instructions WIDOS RSR 630
Page 20 of 27
5.2. How to clamp the pipes
If the swiveling retainer is not at the left limit stop,
thus swivel it there.
Lay the pipe onto the prism and clamp it by the
clamping belt in near to saw-cut.
Lay the clamping belt around the pipe and the
prism.
Lead the belt from the inside to the outside
through the aperture of the ratchet and tighten it.
Clamp the pipe firmly onto the prism by moving
several times the grip of the ratchet into direction
of the arrow.
The ratchet snaps in at both ends.
Attention! Do not deform pipes with thin walls.
The belt can be unclamped again by pulling the
safety gripper into direction of the ratchet grip.
Safety gripper
Ratchet grip
