Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
29.03.2011
Working instructions WIDOS RSR 630
Page 16 of 27
4.2. Saw blade guidance and saw blade cover
The saw blade guidance is mounted to the saw blade
cover. The saw blade cover should be adjusted in
such a way that the lower edge is somewhat above
the pipe to be cut.
•
Keep hold of the saw blade guiding, detach the
hexagon socket screw and shift the saw blade
guiding to the requested height.
•
Fix the saw blade cover by the hexagon socket
screw again.
(Saw blade guidance upper side)
The saw blade runs through the identical saw blade guidings upside and downside.
It is lead through the two rollers and supported to the backside by the larger roller on one side.
The roller with eccentric can be adjusted. It is adjusted correctly if both rollers can still be
turned somewhat towards each other and if the saw blade runs even.
For setting the guidance, release the left-hand counter nut by means of fork wrench size 24.
Now the eccentric is turned with hexagon socket wrench size 6 until the rollers have the
desired distance.
Secure the eccentric again by means of the counter nut
Saw blade guidance upper side
Saw blade
Saw blade cover
Rollers for guidance left and right
Supporting roller
Counter nut
Eccentric
Hexagon-head screw
