Kunststoffschweißtechnik
Safety rules
Chapter 2
29.03.2011
Working instructions WIDOS RSR 630
Page 11 of 27
2.9. Specific dangers
2.9.1. Danger of cutting or catching clothes
You can cut yourself during sawing or when exchanging the saw blade!
•
Before starting the cutting operation, take care that no person is standing in
the operating, swiveling or cutting area.
•
Always wear safety gloves when exchanging the saw blade.
2.9.2. Danger of stumbling over electric wire
Make sure that no person has to step over the wire. Lay the wire in such a way
that the danger is kept to a minimum. Do not squeeze, buckle etc. the wires.
2.9.3. Danger of being injured by chips / oddments
•
Wear safety glasses during cutting.
•
Adjust saw blade covering onto the pipe diameter.
•
Never
remove oddments as long as the saw is running.
2.9.4. Risk of injury of noise
Noises exceeding 80 dB (A) may occur; during planing it is obligatory to wear ear
protection!
2.10. Maintenance and inspection, repair
All maintenance and repair work has to be basically performed with the machine in
off position.
During this, the machine has to be secured against unauthorized switching on.
2.11. Remaining risks
Even at purpose-oriented use and even if following all the relevant safety instructions, the
following risks are remaining due to the construction conditional on the purpose of operation of
the machine:
•
Injuries caused by parts of the work pieces which are squirting away.
