Safety rules
Chapter 2
Chapter 2
Chapter 2
Chapter 2
16.05.17
Working Instructions WIDOS MAXIPLAST
Page 12 of 41
2.8.
2.8.
2.8.
2.8.
Danger while handling the machine
Danger while handling the machine
Danger while handling the machine
Danger while handling the machine
The machine WIDOS MAXIPLAST
MAXIPLAST
MAXIPLAST
MAXIPLAST is constructed according to the actual technical standards and the
acknowledged technical safety rules.
However, dangers for the operator or other persons standing nearby may occur.
Also damages to the machine itself or to other things are possible.
The machine must only be used
•
according to the prescription
•
in safety technical impeccable status
•
disturbances, which may affect the safety of the machine must be immediately cleared.
2.9.
2.9.
2.9.
2.9.
Danger caused by electrical energy
Danger caused by electrical energy
Danger caused by electrical energy
Danger caused by electrical energy
Only skilled qualified workers are allowed to work at electrical features.
•
The electrical equipment of the machine has to be regularly checked.
•
Loose connections and damaged cables have to be replaced immediately.
•
The heating element need to be protected from rain and dropping water, eventually
put up welding tent.
•
The use on construction sites is only allowed according VDE 0100 over a power
distributor with a FI-safety switch.
2.10.
2.10.
2.10.
2.10.
Specific dangers
Specific dangers
Specific dangers
Specific dangers
2.10.1
2.10.1
2.10.1
2.10.1
Danger of burning / heating element, protective box, welding area
Danger of burning / heating element, protective box, welding area
Danger of burning / heating element, protective box, welding area
Danger of burning / heating element, protective box, welding area
You may burn parts of your body and material may also be ignited!
•
The heating element is heated up to over 200° C
200° C
200° C
200° C!
•
Do not leave the heating element unattended.
•
Take enough safety distance to materials which may be ignited.
•
Do wear safety gloves.
•
Always put the heating element back into its box before and after usage.
•
Only transport the heating element at the holder, do not touch the surfaces of the
heating element.
2.10.2
2.10.2
2.10.2
2.10.2
Danger by stumbling over electric wires
Danger by stumbling over electric wires
Danger by stumbling over electric wires
Danger by stumbling over electric wires
•
Make sure that no person must step over the wires.