widos MAXIPLAST, Working Instructions Translation

Page: 42 / 57

WIDOS
WIDOS WIDOS
WIDOS Einsteinstr. 5 Phone +49 7152 9939 0
Wilhelm Dommer Söhne D-71254 Ditzingen Fax +49 7152 9939 40
GmbH E-mail: info@widos.de Webside: www.widos.de
16.05.17 Working Instructions WIDOS MAXIPLAST Page 27 of 41
7. 7. 7. 7. Maintenance instructions Maintenance instructions Maintenance instructions Maintenance instructions
Goal of the chapter is: Goal of the chapter is: Goal of the chapter is: Goal of the chapter is:
•
Keeping of the nominal state and the operation capacity of the machine.
•
Increasing of the efficiency by avoiding non-planned outage.
•
Efficient planning of the maintenance works and the maintenance tools.
7.1. 7.1. 7.1. 7.1. General General General General
•
Replace damaged parts immediately, be particular cautions with electrical parts - dirt and
wetness are very good current conductors.
Prescribed maintenance and inspection works should be performed in time. The DVS gives
the advice of inspection works after 1 year.
For machines with a specially high usage percentage the testing cycle should be shortened .
The works should be performed at the WIDOS GmbH company or by an authorized partner.
•
Only use WIDOS spare parts when executing repairs.
7.2. 7.2. 7.2. 7.2. Clamping elements Clamping elements Clamping elements Clamping elements
•
For a long service life clean and grease regularly the treaded spindles and the joint parts which
are used for clamping the pipes.
7.3. 7.3. 7.3. 7.3. Planer Planer Planer Planer
•
Never lay the planer onto its discs!
•
The blades of the planer must be checked for sharpness. Wrong blades must be either turned over
(double sided) or replaced (max. thickness of the shavings =0,2 mm!)
7.4. 7.4. 7.4. 7.4. Storing Storing Storing Storing
•
Cover the guidance bars and the spindle with thin oil film.
•
Store the machine dry.
7.5. 7.5. 7.5. 7.5. Cleaning of the machine Cleaning of the machine Cleaning of the machine Cleaning of the machine
The used materialis and clothes have to be handled and disposed off properly especially
•
when cleaning with solvents
•
when lubricating with oil and grease
7.6. 7.6. 7.6. 7.6. Disposal Disposal Disposal Disposal
At the end of the life time, the machine has to be disposed of properly, non-polluting
and in accordance with the national laws of waste disposal.