widos HRG 6 Segment, Working Instructions Translation

Page: 7 / 36

Description of product Chapter 1
06/06/19 Working Instructions WIDOS HRG 6, Segment Page 7 of 47
1.3 Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
1.4 Designation of the product
The product is designated by a nameplate.
It contains the type, the serial number and the year of construction of the machine.
1.4.1 Technical data
1.4.1.1 WIDOS HRG 6, Segment general data
Material: - PE-HD, (PP)
Emissions - Noises exceeding 80 dB (A) may occur; during planing it is
obligatory to wear ear protection!
- When using the named pipe materials and when welding
below 260°C, no toxicant damp arises.
Ambient conditions in the welding
area:
- take care for cleanness (no dust at the welding area)
- if secured by an appropriate measurement that allowed
conditions for welding are indicated, it is possible to work in
any outside temperature condition as far as the welder is
not constrained in its manual skill.
- avoid humidity, if necessary use a welding tent
- avoid strong sun rays influence
- protect from wind, shut the pipe ends.
Weight (with 2 reduction inserts): appr. 870 kg
1.4.1.2 Hydraulic aggregat
Feeding: CEE 32 A – phase inverter
Voltage: 400 V
Power: 12 kW
Frequency: 50 Hz (± 10 %)
Motor speed: 1450 / 2900 min
-1
Operating pressure: 0 - 160 bar, adjustable
max. working pressure 160 bar
Current hydraulic pump: 5,2 / 4 A
Power hydraulic pump: 2,0 / 1,5 kW
Volume flow rate 3,8 l/min
Weight: appr. 47 kg