widos HRG 6 Segment, Working Instructions Translation

Page: 17 / 36

Operating and indicating elements Chapter 4
06/06/19 Working Instructions WIDOS HRG 6, Segment Page 17 of 47
4.3 Planer
No. Name Function
15 Safety bolt - Is axially secured by means of a grub screw. For
removing the safety bolt, turn it until the lever shows
almost vertically upwards, then remove it.
16 Movable supporting fork - For inserting / lifting-off the planer. After removing the
safety bolt, the supporting fork moves into direction of
the arrow.
17 Supporting bolt - Insert the planer with the supporting bolts in the
locking forks of the clamping rings / reception box.
18 Connnecting cable with plug
CEE-16A
- Connect with socket 400 V / 16 A on hydraulic aggregat
19 Screw for chain tightening - Release the screw and move it in the slot for
tightening or releasing the planer chain. Tighten again
firmly the screw.
20 Switch on/off - The on/off switch of the planer is situated at the planer
plug.
21 Vent screw - Attention! Never put the planer on its side, there is
the risk of oil slick at the vent screw.
Remove the safety bolt only during inserting the planer into the basic machine or
taking out of the basic machine!
16
15
17
18
20
21
19