Kunststoffschweißtechnik
Equipment care / maintenance / repair
Chapter 7
22.11.2005
Working Instructions WIDOS 4900 CNC 3.0 (110 V)
Page 48 of 76
7.9. Error Signals
If during the work with the machine
•
the DVS prescriptions are not followed
•
the necessary steps for the welding process are not correctly or not at all performed
•
certain measuring devices do not function
an error message will appear on the display.
By pressing the button <Enter>, the error message can be deleted on the display.
Error message
Cause
Remedial action
heating element
temperature not o.k. !
Heating element did not yet set
the nominal temperature and is
out of the tolerance of
±
10° C
Wait until the heating element
is heated up and the setting
process is finished
pipes clamped
too long !!
Pipes are clamped too close one
to the other and the planer does
not fit between the ends
Clamp the pipes with more
distance one to the other
insert
heating element !!
Message „insert heating
element“ has been confirmed
with <Start> although the heating
element has not yet been
inserted
Insert heating element and
confirm with <Start>
error: time between
plan./warm. too long !
The time between inserting the
heating element and closing has
overgone 10min.
Confirm with <Enter> and
repeat planing process
pipes slipped
in clamps
Pipes were not properly clamped
and are slipping through the
clamping devices
Clamp the pipes tightly
heating element
is still inserted !!
After completion of the change
over time, the heating element
was not removed
Abort the welding process and
restart welding
error PCMCIA
Any other PCMCIA error
Check if PCMCIA card is
present or is inserted in a
wrong way
error PCMCIA
card full
Memory space of the PCMCIA
card is full
Read out data from the
PCMCIA card and perform
new formatting
error PCMCIA
write protect
PCMCIA card has a write
protection
Remove the write protection
at the PCMCIA card
warning PCMCIA
battery low
Battery power of the PCMCIA
card is too weak
Replace the battery as soon
as possible
warning PCMCIA
battery empty
Battery of the PCMCIA card is
empty and all data were deleted
Replace battery
error PCMCIA
not formatted
PCMCIA card is not formatted
and no data can be stored
Formate PCMCIA card with
the laptop