Kunststoffschweißtechnik
Description of product
Chapter 1
14.01.2015 Working
Instructions
WIDOS 4002 S CNC 3.0
Page 8 of 92
1.4. Marking
of
product
The product is marked by a type-plate at the basic machine.
It contains the machine type, the serial number and the year of construction.
1.4.1. Technical
data
All important technical data of the singular components are mentioned.
This allows a quickly information about the capacity and the structure.
1.4.1.1. WIDOS
4002 CNC 3.0
General data
Material:
PP; PE
Pipe dimension:
Outside-
= 90 – 315 mm
Voltage:
240 V
Frequency:
60 Hz
Power:
6,1 kW
Wires cross section:
1,5 mm²
Max. working pressure
8 bar
Weight (without reduction
inserts and packing):
325 kg
Dimensions: (width x depth x
height)
1000 x 1400 x 1300
1000 x 1600 x 1400 (with conversation kit)
Emissions
- The sound pressure level during planing is below 70
dB (A)
- In case of use of the prescribed plastics and if the work
is performed within the temperature range up to 260 °C
/ 500 °F, no toxic fumes will be generated.
Environmental conditions in the
welding area
- Be aware of cleanliness (no dust at the welding point)
- If secured by an appropriate measurement that allowed
conditions for welding are indicated, it is possible to
work in any outside temperature condition as far as the
welder is not constrained in its manual skill.
- protect from moisture influence
- avoid strong sun rays radiation
- protect from strong wind
- attention when swiveling out the heating element
1.4.1.2. Basic
machine
Frame material:
Construction steel
Servo – motor:
Power:
1,93 kW
Voltage:
400 V (
10 %)
Amperage:
4,8 A
Frequency:
50 Hz
Engine revolution:
IP 55
Type of protection:
4000 (U/min)
Driving torque:
max. 5,8 Nm
