Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 / 71 52 99 39 - 0
W. Dommer Söhne GmbH
D-71254 Ditzingen-Heimerdingen
Fax
+49 / 71 52 99 39 - 40
info
@
widos.de
Website: www.widos.de
14.01.2015 Working
Instructions
WIDOS 4002 S CNC 3.0
Page 41 of 92
6. Diagnosis program
The purpose of the diagnosis program is the modification of stored machine parameters.
In the following lines all important diagnosis numbers for the function tests are described.
Inappropriate operation of the diagnosis functions may lead to disturbances in
the machine and may destroy components.
The diagnosis functions allow a direct access to the specific parameters of the
machine and have to be operated only by skilled staff.
Display:
2
nd
line:
WIDOS 4002 S CNC
22.11.2000 10:10
Press button <Enter>
Display:
2
nd
line:
Print SD
_
Press button <Start> for the next menu
Display:
2
nd
line:
Print SD
_
Press several button <Start> until cursor is below “Diag“
Display:
2
nd
line:
Diag Clk WICON Param
_ 10:10
The respective diagnosis number can be set with buttons <+>, <-> and
<Enter>.
No. Signification
0008
The actual position of the slide is displayed
0010
The actual temperature (°C) of the heating element is displayed
0011
The environmental temperature (°C) is displayed
0012
The actual pressure (bar) is displayed
0013
The required bead height (in 1/10 mm) which was calculated by the
programmed welding parameters is displayed
0014
The required heating time which was calculated by the programmed
welding parameters is displayed
0015
The required change over time which was calculated by the programmed
welding parameters is displayed
0016
The required pressure build-up time which was calculated by the
programmed welding parameters is displayed
