widos 25000 mobile Working Instructions Translation Download Page 35

Page: 35 / 120

Kunststoffschweißtechnik

Operating

and

indicating elements

Chapter 4

07.02.13

Working Instructions WIDOS 25000 mobile

Page 35 of 116

4.12. Vacuum device (optional)

You may evacuate the cutting chips resulting from the cutting of the pipe ends using the
vacuum device AF14.



Connect vacuum device and chip tank using the short

hose.



Mount the vacuum hose to the chip tank; while

evacuating a large part of the cutting chips will be
collected in the tank, the rest in the chip bag.



Connect the connecting cable to the power socket CEE-16 A at the switch cabinet.



Activate / deactivate the vacuum using the switch at the motor.



Please learn handling and maintenance of the vacuum device AF14 from the separately

enclosed working instructions of the Felder company.

Empty the chip tank regularly, at the latest in case the vacuum performance
decreases.

Vacuum device AF 14

Chip-tank

Vacuum hose

Switch for vacuum device

Chip bag

Summary of Contents for 25000 mobile

























































































































Search results

Summary of Contents for 25000 mobile

Reviews:

Related manuals for 25000 mobile

Brands by name

Popular brands

widos 25000 mobile, Working Instructions Translation

Search results

Summary of Contents for 25000 mobile

Reviews:

Related manuals for 25000 mobile

Brands by name

Popular brands