Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
07.02.13
Working Instructions WIDOS 25000 mobile
Page 26 of 116
4.4.1. How to adjust the travel speed of the heating element
In order to heat the pipe ends, drive the heating element between the clamped pipe ends
(arrow). The travel speed is factory-set.
If necessary you may modify the speeds for driving in and out (see chapter: 7).
4.4.2. Heating element zones
The heating element features two heating plates. Each heating plate has two heating zones.
Lower ring bolt
with plate, bolt
and hexagon
socket screw
View without guard plate
:
Hydraulic block
4 for heating
element
Front heating plate
Rear heating plate
Heating zone 1
(front upper side)
Heating zone 3
(front lower side)
Heating zone 2
(rear upper side)
Heating zone 4
(rear lower side)
