Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
07.02.13
Working Instructions WIDOS 25000 mobile
Page 30 of 116
4.7. Rear
leveling
leg
The leveling legs keep the machine in balance; they are lifted and lowered individually.
Driving up and downwards is done by: <Mode select>
no. 1, and by <Level left back> <Level right back>.
It is indispensable to fix the machine to the ground by
the leveling legs during welding in order that the
machine cannot tilt e.g. while opening the clamping
rings.
In case the machine is transported, you may swing
the rear leveling leg to the front side.
4.8. How to remove the carriage
You may remove the carriage before welding e.g. in order to avoid unnecessary lifting of the
pipes.
Drive the leveling legs out.
Remove the ring bolts on both sides.
Then pull out the claws on both sides.
Lift the machine by the leveling legs until there is enough air between machine and
carriage.
Rear leveling leg
Ring bolt
Claw
Lugs
