65
iSavi
™
User Guide
LED Legend
* LED Flashing
† LED Flashing in sequence
Situation
Power
Button
Antenna Pointing LEDs Exit Pointing
Mode Button
Actions / Status
Exit Pointing
All Antenna Pointing LEDs are solid green,
Azimuth and Elevation are in correct
positions. Press the flashing Exit Button
once to exit Antenna Pointing mode and
register to the network. Note: Pressing the
Exit Button for 3 seconds will put iSavi
™
into the alternative Audio Pointing mode.
Network
Registering
Azimuth and Elevation are correct. Press
Exit Button to exit Antenna Pointing and
register to network.
Ready for
Service
Network registration successful and ready
for service. All LEDs will turn off after about
1 minute.
Note: When all LEDs are off, you can
always check the LED state by pressing
the Exit Button once.
Data
Activated
Data activated successfully through web
console/ Control app. You can now connect
your smart devices to iSavi
™
terminal and
start accessing the internet. Note: For LED
status check, you can always press the
Exit Button once.
Audio
Pointing
Mode ON-
Global Beam
available
Audio Pointing Mode is enabled. Satellite
signal found.
Safe Mode
Safe Mode is enabled.
Powering
Down
Pressing the Power Button for 5 seconds.
The Antenna Pointing LEDs flashing red in
sequence for approximately 30 seconds
before turning off.
†
†
*
*
†
*
*
