15
iSavi
™
User Guide
STEP 5
Once iSavi
™
is connected to the network, you are
ready to start a data session. Press the ‘Connect
data’ button to begin and ‘Disconnect data’ to end
all connection to the Internet.
The web console provides data access through
the ‘Activate data connection’ button on the Home
page when using a web browser.
To stop access to data press ‘Deactivate data
connection’
Note:
Signal strength needs to be at least 42dB and above for an acceptable service to commence. You may
check the signal strength and registration status using the home page of the web console or the smart
phone Control app.
If the signal strength level indicated in the web console is low under registered conditions, you can
slowly adjust the terminal angle and monitor the signal strength displayed in web console.
Turn off the terminal by pressing the ‘Power’ button for five seconds.
