Wide CL24s, User Manual, Page: 8 / 72

5
Safety Introductions
On Safety
1. Before connecting the AC power cord to the DC adapter outlet make sure the
voltage designation of the DC adapter corresponds to the local electrical supply.
2. Never insert anything metallic into the cabinet openings of the medical LCD
monitor. Doing so may create the danger of electric shock.
3. To reduce the risk of electric shock, do not remove cover. No user-serviceable
parts inside. Only a qualified technician should open the case of the medical LCD
monitor.
4. Never use your medical LCD monitor if the power cord has been damaged. Do
not allow anything to rest on the power cord, and keep the cord away from areas
where people can trip over it.
5. Be sure to hold the plug, not the cord,when disconnecting the medical LCD
monitor power cord from an electric socket.
6. Unplug your medical LCD monitor power cord when it is going to be left unused
for an extended period of time.
7. Unplug your medical LCD monitor power cord from the AC outlet before any
service.
8. If your medical LCD monitor does not operate normally, in particular, if there are
any unusual sounds or smells coming from it, unplug it immediately and contact
an authorized dealer or service center.
9. Please contact the manufacturer if the set should be installed in an inaccessible
area.
Warning
y
Do not touch input or output connectors and the patient simultaneously.
y
This medical LCD monitor is intended for connection to input/output signals and
other connectors that comply with relevant IEC standard (e.g.,IEC60950 for IT
equipment and IEC60601 series for medical electrical equipment). In addition,
all such combination-system shall comply with the standard IEC 60601-1-1
or clause 16 of the 3Ed. of IEC60601-1, respectively, safety requirements for