Wide CL24s, User Manual, Page: 27 / 72

CL24s USER’S MANUAL
SHARPNESS Set the sharpness of image (Softest, Soft, Normal, Sharp,
Sharpest)
OVER SCAN Adjust the displayed size.(0~8)
ZOOM / PAN Enlarges the image, move image left and right.
FREEZE Keeps the image still.
SETUP
LANGUAGE Change the OSD language (9 language)
TRANSPARENCY Adjust the OSD back ground from white opaque to half
translucent.
OSD POSITION Change the OSD position (9 positions)
OSD TIMEOUT Adjust time until the OSD Menu will disappear after adjusting the
menu. (5, 10, 20, 30, 60, 90, 120, 180, 240 seconds)
RESET
SETTINGS Changes the all OSD value to factory outgoing status.
AUTO INPUT
SELECT Disable or enable auto source select.(ON: Searches through all
possible input source until an active video source is found. OFF:
Video input is manually selected.)
PIP LAYOUT Changes the layout. (OFF, PIP, PBP1, PBP2)
INPUT Changes the secondary source.
SIZE Changes the PIP size (Small, Large)
POSITION Changes the PIP position.
SWAP Swaps the position of the Primary and Secondary images.
On Screen Display(OSD) System Overview
Submenu Descriptions
Submenu Function/Description
BRIGHTNESS Press the BRIGHTNESS button to display the ADJUST menu or UP,DOWN hot
key. Setting the brightness too high or too low will decrease the amount of
visible grayscales.
CONTRAST Press the CONTRAST button to display the ADJUST menu or +,- hot key.
Setting the Contrast too high or too low will causes loss of some grayscales.
CLOCK Do not adjust freely. It will adjust fine state automatically after auto adjustment.
When frequency value is wrong, the horizontal image have a wrong size or
noise.