Wide CL24s, User Manual, Page: 24 / 72

21
3. Pick a Submenu Category
After using the UP ▲ and Down ▼ buttons to navigate to the desired main menu
category, press the
+
button to enter the submenus associated with the selected
main menu.
Submenus for the following signal types:
After selecting a main menu category, press the
+
button to enter the associated
submenus as shown below. Next, use the UP ▲ and Down ▼ buttons to navigate to
the desired submenu, then adjust as needed with the
+
and
-
buttons. Select the
MENU button to exit from the submenu or main menu.
VGA input source
Menus Sub-menus Function Descriptions
ADJUST
BRIGHTNESS Increases or decreases the brightness. (Range : 0~100)
CONTRAST Increases or decreases the contrast. (Range : 0~100)
CLOCK Increases or decreases the sampling frequency. (Range : 0~100)
PHASE Increases or decreases the Phase level. (Range : 0~100)
AUTO ADJUST Fits to the most appropriate screen on the D-SUB Analog / RGBs
signal.
COLOR SETTING SELECT Changes the image setting. (MODE A,B)
MODE Changes the color temperature mode. ( C1, C2, C3, USER)
RED Red balance. (Only works with USER mode) (Range : 0~255)
GREEN Green balance. (Only works with USER mode) (Range : 0~255)
BLUE Blue balance. (Only works with USER mode) (Range : 0~255)
IMAGE
SCALING MODE Changes the image size.(FILL ASPECT, 1:1, FILL H, FILL V, FILL
ALL)
H POSITION Adjusts the horizontal position of the displayed source image.
(Range : 0~100)
V POSITION Adjusts the vertical position of the displayed source image. (Range
: 0~100)
GAMMA Adjusts GAMMA value. (BYPASS, 1.8, 2.0, 2.2, 2.4, 2.6, DICOM
Preset, V0, V1, V2)
SHARPNESS Sets the sharpness of image. (Softest, Soft, Normal, Sharp,
Sharpest)
OVER SCAN Adjusts the displayed size.(0~8)
ZOOM / PAN Enlarges the image, moves images left and right.
FREEZE Keeps still the image.