Wide CL24s, User Manual, Page: 11 / 72

CL24s USER’S MANUAL
expose this unit to rain or moisture. Do not use this unit’s polarized plug with an
extension cord receptacle or other outlets unless the prongs can be fully inserted.
This display is designed to meet the medical safety requirements for a patient vicinity
device. This device may not be used in connection with life support equipment.
Underwriters Laboratories (UL) Classification:
UL safety Compliance:
This medical LCD monitor is U.L. Classified WITH RESPECT TO ELECTRIC SHOCK,
FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL 60601-1/CAN/
CSA C22.2 NO. 601.1
EEC Safety Compliance:
This medical LCD monitor unit meets the requirements of EN-60601-1 so as to
conform to the Medical Device Directive 93/42/EEC (general safety information). Use
120V rating 5-15P type plug only in the U.S.
This medical LCD monitor complies to the above standards only when used with the
supplied medical grade power supply.
24.1” Monitor (FS-L2403D) - ATM090-P240(ADAPTER)
Caution
: Make sure the power cord is the correct type that is required in your area. This
medical LCD monitor has a universal power supply that allows operation in either 100-120V AC or
200-240V AC voltage areas (no user adjustment is required).
Use the proper power cord with correct attachment plug type. If the power source is 120 V AC,
use a power cord which is a Hospital Grade Power Cord with NEMA 5-15 style plug, labeled for 125
volts AC with UL and C-UL approvals. If the power source is a 240 V AC supply, use the tandem (T
blade) type attachment plug with ground conductor power cord that meets the respectiveEuropean
country’s safety regulations.
The hospital-grade plug for medical products intended for use in Denmark has DEMKO approval
and is rated 13 amps at 250Vac. Plug is recommended for use in medical applications and
specifications are being added to the standard SB 107-2-D1. Plug mates with maker’s Danish
hospital-grade socket. Hospital sockets have slightly different shaped openings allowing only the
hospital plug, not the standard Danish plug, to be inserted, to protect the ac circuit in specific
medical settings. A ground post, located on the back of the display, may be used for the purpose
of grounding the display’s chassis. Any such ground must be installed in accordance with applicable
electrical codes. The groundpost is shown on the mechanical drawing found in this user’s guide.