3
Description
The Aquatronic Power Thermostatic Shower is an all-in-one power
shower with an integral mains voltage pump, separate controls for
flow and temperature, and a temperature override button. It features
a 15 mm dual-entry push-fit manifold which supports various inlet
supply configurations. The manifold includes inlet filters and check
valves. The thermostatic mixer incorporates a wax capsule sensing
unit.
Designed to be surface mounted, the Aquatronic Power
Thermostatic Shower comes complete with an adjustable spray
handset with three settings, flexible hose, adjustable slider, sliding
rail, soap tray and bracket.
INTRODUCTION
IMPORTANT SAFETY INFORMATION
WARNING!
1.
Products manufactured by us are safe and without risk provided
they are installed, used and maintained in good working order in
accordance with our instructions and recommendations.
2.
THIS APPLIANCE MUST BE EARTHED. ENSURE
SUPPLEMENTARY BONDING COMPLIES WITH THE
"REQUIREMENTS FOR ELECTRICAL INSTALLATIONS".
In accordance with the current edition of ‘The Plugs and Sockets
etc. (Safety) Regulations' in force at the time of installation, the
appliance is intended to be permanently connected to the fixed
electrical wiring of the mains system.
3.
DO NOT CONNECT THE APPLIANCE TO A MAINS-FED WATER
SUPPLY
. Such a connection will damage the appliance, and is not
covered under the manufacturer’s guarantee.
4.
The appliance must not be fitted where it may be exposed to
freezing conditions. Make sure that any pipework that could become
frozen is properly insulated.
5.
DO NOT
operate the appliance if it is frozen. Allow the appliance
to thaw before using again.
