INSTRUCTION SHEET FOR READY-TO-ASSEMBLE
731W
Cambridge
Storage
Cabinet
Congratulations on your choice of a Whittier Wood product.
This fine, hardwood furniture will be a handsome addition to your home. Just follow the step by step instructions.
SERVICE POLICY:
We will replace any parts which are defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer service department
directly for replacement parts.
If you live in the U.S. or Canada, you can reach us
Toll Free at: 800-653-3336.
All other customers can reach us by
calling 541-687-0213
,
Faxing 541-687-2060
or writing to P.O. Box 2827, Eugene, OR-USA 97402.
Customer service personnel can be reached Monday-Friday, 7:00 am. to 5:00 p.m. Pacific time.
A message can be left for customer service 24 hours a day, seven days a week.
When contacting us, please provide the furniture model number,
part letter, quantity needed, reason for replacement and your full name and address along
with a telephone number in case we need to contact you.
For normal household use only.
NOT
recommended for
commercial use.
IMPORTANT NOTES
Read instructions completely before starting assembly.
Additional sanding with 220 grit is recommended for enhanced beauty.
Always sand with the grain of the wood. Be careful not to sand through the veneer.
Finish all parts before final assembly; before finishing, read enclosed Finishing Hints.
To seal the wood, apply a minimum of one coat of polyurethane, varnish, lacquer
or the equivalent to all sides. This will prevent moisture changes which could cause future
warpage or cupping.
Store the panels:
1)
in their box,
2)
in a dry place,
3)
in temperatures ranging from 40° to
90°. (Not on a cold, possibly damp, cement floor.)
INSPECT YOUR FURNITURE PERIODICALLY FOR ANY LOOSE GLUE JOINTS OR SCREWS, OR ANY OTHER PROBLEM WHICH
MAY BE AFFECTING THE STABILITY OF YOUR FURNITURE. TIGHTEN OR REPAIR AS NEEDED.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
Rev. 9/04
Do not climb, sit, or stand
on this piece of furniture.
Unload items from this unit
prior to moving.
Do not overload shelves on this
unit.
Before loading or moving this
unit, check all screws and
supports for tightness.