34
11
Commissioning / Setting
11.1
Filling the Reservoir (Lid Lift Version)
The Electro 10, 20 and 30 Lubricators have been designed with a direct fill reservoir via a secure
opening lid. The opening lid forms the rear half of the cabinet roof. This direct fill method is the
quickest and most user friendly filling method.
11.1.1
Access the Grease Reservoir
Open the main door of the cabinet using the key and
hexagon tool entry method as described in section 8.2.
Inside the cabinet, in the top right hand corner, you will
find a locking mechanism for the lid. Rotate the lock
handle into a horizontal position then gently pull towards
the main door. This will unlock the lid. Ease the opening
portion of the lid upwards until the supporting hinge
clicks in place.
Through the open portion of the lid you will be able to see
the grease reservoir.
Note: ensure only approved grease enters the reservoir. Any
non-approved materials could severely damage the electric pump.
11.1.2
Filling the Grease Reservoir
Grease can be poured directly from the drum or storage bag, into the reservoir.
o
Electro 10 reservoir will hold 90kg.
o
Electro 20 reservoir will hold 200kg.
o
Electro 30 reservoir will hold 360kg.
Do not over fill the reservoir.
Once filled close the lid by releasing the
supporting hinge. Press firmly shut and secure
using the locking mechanism. It is important
that the lid is locked correctly; if the lid is left
open, the grease may biodegrade rapidly.