background image

9

 

What the lights mean

The high intensity L.E.D. display indicates the 

possible category or type of metal currently being 

detected.  

It is normal for the display to show and hold a 

random indication during use, as well as indicating 

targets while searching in the All Metal mode.  The 

L.E.D. display will reset with the TOGGLE pushed 

to the Reset position and released but it is not nec-

essary.  The L.E.D. display automatically produces 

a new indication each time a new target passes near 

the loop.  Consult the display indication only when 

it is accompanied by a smooth repeatable audio 

sound.

 

During heavy interference, if the SENSITIVITY 

control is set too high for the conditions, display 

accuracy may be reduced.  If errors are excessive, 

reduce the SENSITIVITY control by turning it 

slightly counter clockwise.

Red

This L.E.D. indicates the metal is likely iron or steel 

such as nails, steel bottle caps or iron relics.  Dig 

only if iron/steel is of interest.

Yellow

This L.E.D. indicates the mid range where jewelry 

and nickel most often falls.  Unfortunately    

aluminum and lead also fall into this category.  To 

successfully find jewelry one must dig nickels, 

small to medium aluminum and lead.

Green

This L.E.D. indicates the high end of the scale 

where copper and silver coins typically indicate.  

Large brass, large aluminum, and other large non-

ferrous (not of iron) metals may also  indicate in this 

area.

L.E.D. Display 

Ch5 BeachHunter 300 LED Display  

RED
IRON/STEEL

YELLOW
JEWELRY/
NICKEL

GREEN
COPPER/SILVER/
LARGE BRASS/
ALUMINUM

Summary of Contents for BeachHunter 300

















Reviews: