33
10. Trac Offset
Allows AUTO TRAC™ to track ground minerals
either positive or negative in relationship to the
correct setting (under, or over kill).
TRAC OFFSET allows the AUTO TRAC™
feature to track the ground slightly more or less
than what would normally be considered perfect,
mostly for experts that prefer a slight offset.
A slightly positive offset can be used to enhance
the responses of small metals (gold nuggets) in
highly-mineralized ground. Positive is indicated by
a slight increase in threshold as the loop ap-
proaches the ground in the all-metal mode. Dis-
crimination and depth may also be improved.
A negative offset may be used to eliminate particu-
larly troublesome "hot rocks" in areas that are
otherwise difficult to search. Negative offset is
indicated by a loss or slight decrease in the thresh-
old as the loop approaches the ground in the all-
metal mode.
+ 0
AUTO TRAC OFFSET
MIN
MAX
Tips - Recommended only
for experienced operators
who fully understand
ground rejection.
(G.E.B./Trac section)
11. Trac Inhibit
Prevents AUTO TRAC™ from tracking the
ground during target detection.
TRAC INHIBIT ON prevents the AUTO TRAC™
feature from altering Ground Balance during the
detection of targets. This prevents the possibility
of tracking to the corrosion associated with most
metals. TRAC INHIBIT ON is recommended for
most searching conditions. Some metals do not
corrode (GOLD) and since tracking is extremely
important in high mineral conditions, the ability to
turn TRAC INHIBIT OFF is available. OFF is
automatically selected in the Prospecting Program
and is recommended for prospecting.
TRAC INHIBIT
ON
OFF
TO CHANGE PRESS
ENTER
Tips - ON for most search
conditions, OFF for pros-
pecting.
(G.E.B./Trac section)
Chapter 5 XLT
®
Pro Options
