Whites XLT Manual Download | Manualshive

Page: 25 / 56

background image

25

Chapter 5 XLT

®

Pro Options

Pro Options

AUDIO

AUDIO

AUDIO

AUDIO

AUDIO

1. RATCHET PINPOINTING - Pinpoint feature, automatically de-tunes for center location.
2. S.A.T. SPEED - Self Adjusting Threshold or Auto-tune, automatically maintains threshold.
3. TONE I.D. - Assigns each V.D.I. target number its own special tone or sound.
4. V.C.O. - Pinpoint or non-discriminate feature, increases pitch or tone with target strength.
5. ABSOLUTE VALUE - Bigfoot or Goldfoot loop accessories only.
6. MODULATION - Motion modes produce the same, or different volume, based on target depth.

G.E.B./TRAC

G.E.B./TRAC

G.E.B./TRAC

G.E.B./TRAC

G.E.B./TRAC

7. AUTOTRAC - Automatically updates Ground Balance during searching.
8. TRAC VIEW - TRACK appears on right side of display during AUTO TRAC adjustments.
9. AUTOTRAC SPEED - Dictates when AUTO TRAC adjusts Ground Balance.
10. AUTOTRAC OFFSET - Positive or negative AUTO TRAC (over, or under kill).
11. TRAC INHIBIT - Prevents tracking the ground during target detection.
12. COARSE G.E.B. - (Manual Ground Balance) Coarse viewing, or overriding automatic.
13. FINE G.E.B. - (Manual Ground Balance) Fine viewing, or overriding automatic.

DISCRIMINATION

DISCRIMINATION

DISCRIMINATION

DISCRIMINATION

DISCRIMINATION

14. DISC. EDIT - Change V.D.I. (target reference numbers) accepted (detected), or rejected status.
15. BLOCK EDIT - Speeds EDIT by dragging ACCEPT or REJECT with ARROW controls.
16. LEARN ACCEPT - Target samples can be used to show or teach ACCEPT discrimination.
17. LEARN REJECT - Target samples can be used to show or teach REJECT discrimination.
18. RECOVERY SPEED - Speeds target responses, so close together targets each respond.
19. BOTTLECAP REJECT - How strongly the instrument rejects or breaks up on iron.

DISPLAY

DISPLAY

DISPLAY

DISPLAY

DISPLAY

20. VISUAL DISC. - Rejected V.D.I. numbers and ICONS do not appear on display.
21. ICONS - Graphic display representation of metal targets, ON/OFF.
22. V.D.I. SENSITIVITY - Response intensity to produce a display indication & 3rd V.D.I. digit.
23. D.C. PHASE - Measurement of ground, or metal target, during pinpointing.
24. GRAPH AVERAGING - SignaGraph

®

information collects over multiples loop passes.

25. GRAPH ACCUMULATING - Emphasizes common or predominate SignaGraph

®

.

26. FADE RATE - Clears or fades non-current SignaGraph

®

information (bars).

SIGNAL (TRANSMIT, RECEIVE)

SIGNAL (TRANSMIT, RECEIVE)

SIGNAL (TRANSMIT, RECEIVE)

SIGNAL (TRANSMIT, RECEIVE)

SIGNAL (TRANSMIT, RECEIVE)

27. TRANSMIT BOOST - Selects the intensity of the signal transmitted from the loop.
28. TRANSMIT FREQUENCY - Alters operating frequency to avoid interference.
29. PREAMP GAIN - Selects the intensity of the signal received from the loop.

(Overview)

«
...
23
24
25
26
27
...
»

Summary of Contents for XLT

























































Reviews:

No comments

Related manuals for XLT

Mini Merlin TFT CH4CO v2

Brand: OGS Pages: 16

Brand: brennenstuhl Pages: 64

Brand: Smart Sensor Pages: 2

Brand: Famous Trails Pages: 6

Brand: Fantini Cosmi Pages: 24

Brand: Velleman Pages: 53

Brand: Kane Pages: 16

Brand: mPower Electronics Pages: 21

Brand: Bounty Hunter Pages: 8

Brand: Bounty Hunter Pages: 7

Brand: White's Pages: 11

Brand: Vibra Pages: 3

Brand: RPB Pages: 24

SILVER BULLET RX7500

Brand: PNI Pages: 24

Brand: PNI Pages: 24

Brand: PNI Pages: 24

Brand: PNI Pages: 28

SENSORO SILVER BULLET RX7600

Brand: PNI Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands