Whites XLT Manual Download | Manualshive

Page: 22 / 56

background image

22

Chapter 4 XLT

®

Basic Adjustments

7. A.C. Sensitivity

Used to select the appropriate sensitivity (degree
that the instrument is responsive to signals) while
being used in the discriminate modes (those which
require movement of the loop).

Select A.C. SENSITIVITY with the ARROW
controls, and press ENTER. Use the ARROW
controls to set the level of sensitivity shown by the
number on the right. Press ENTER.

Sensitivity levels adjust detection depth and also
have a direct effect on detector stability. A.C.
SENSITIVITY levels should be selected carefully
to allow stable, predictable performance. Set a
lower level if the detector behaves erratically.

64

A.C. SENSITIVITY

MIN

MAX

Tip - Preset levels work
well for most conditions.
Reduced levels will
improve stability in difficult
conditions. Increased
levels will improve
detection depth if stability
can be maintained.

Tip-Remember that once
the TRIGGER is
squeezed and released to
go to a search mode, you
can return to the last
adjustment screen used
by pressing either
ARROW control.

8. D.C. Sensitivity

Used to select the sensitivity (degree that the detector
is responsive to signals) while the detector is being
used in non-discriminate modes. These are modes that
do not require movement of the loop to respond. D.C.
SENSITIVITY fine tunes stability and pinpointing.

Select D.C. SENSITIVITY with the ARROW
controls, and press ENTER. Use ARROW controls to
select the desired D.C. SENSITIVITY level shown by
the number on the right. Press ENTER. D.C.
SENSITIVITY levels should be selected carefully to
allow smooth, stable and predictable operation while
allowing for reasonable pinpointing.

A.C. and D.C. Sensitivity Adjustments are
traditionally the way to alter detection depth and
stability. There are other methods available in the
PRO OPTIONS under SIGNAL (TRANSMIT,
RECEIVE), PREAMP GAIN.

30

D.C. SENSITIVITY

MIN

MAX

Tip - Typically, lower
D.C. SENSITIVITY
settings pinpoint shallow
targets far better than
high settings. High
settings will however,
produce more pinpointing
(as well as non-
discriminate mode
depth). Pinpointing
(TRIGGER squeezed),
MIXED-MODE, and
V.C.O. AUDIO are
dramatically impacted by
the D.C. SENSITIVITY
setting.

«
...
20
21
22
23
24
...
»

Summary of Contents for XLT

























































Reviews:

No comments

Related manuals for XLT

Brand: Bacharach Pages: 8

Brand: Velleman Pages: 52

Brand: Rocky Mountain Pages: 13

9 BAND ESD 9270

Brand: Cobra Pages: 13

Brand: Macurco Pages: 160

Brand: Duomo Pages: 8

Brand: Duomo Pages: 10

Brand: Duomo Pages: 7

TrueSafe Gas Cloud

Brand: Vighnaharta Pages: 15

TrueSafe TS 21 I-HC

Brand: Vighnaharta Pages: 19

Brand: Danfoss Pages: 12

Brand: ZKTeco Pages: 27

Brand: Mesutronic Pages: 84

Brand: Tracon Electric Pages: 9

Brand: Stinger Pages: 20

GOLD STINGER X5

Brand: Stinger Pages: 37

Brand: GST Pages: 13

Brand: Compur Monitors Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands