manualshive.com logo in svg

Whiteley Electronics PETS-2, Quick Installation Manual

Share
Download
Whiteley Electronics PETS-2 Quick Installation Manual Download Page 9

PETS-2 Crossing Telephone System

QUICKFIX INSTALLATION HANDBOOK

Page 9

 

of 40

Issue 2

13/12/99

9

WEL Part No.

Signal Box

Crossing

Description

Installation and Maintenance’

Note 1 :

 The Signal Box unit is supplied with one Line Card. Additional line cards may be

required in the Signal Box Unit when working in Paired mode.

Note 2 :

 The Level crossing unit is supplied with two line cards; additional cards will be

required for paired mode or when four telephones have to be provided at a particular
crossing.

Note 3 :

 This is a wall mounted power supply and charger with integral shelves for the

batteries. The size of battery, and the number of PETS 2 units attached to each charger will
be determined by system design for the appropriate backup period. From Q3 1998 an
upgraded version of the charger will be available, providing enhanced monitoring and
integration with the PETS 2 equipment. The original Power Supply and Charger can be
used to power PETS 2.

Note 4 :

 The Remote Alarm Display Kit may be fitted at the Signalbox end and comprises a

small plastic enclosure with a seven segment display and ‘Interrogate’ button. This small
enclosure is to be fixed onto a wall or concentrator. The kit includes a ribbon connector
assembly, to be installed between the internal CPU and termination cards. Also supplied is
a 15 metre lead wired to the Remote Alarm Display. The other end of the cable is to be
terminated in the PETS 2 Junction Box.

Note 5 :

 Battery sets of 6Ahr or 12Ahr for use with the original and new version Power

Supply and Battery Charger.

Note 6 :

 The 17Ahr battery option is available with the new Power Supply and Battery

Charger, only.

Note 7 :

 Please check with WEL Sales Office before ordering. When firmware upgrades

are available, this code number relates to a single EPROM - the same EPROM is used
within the Signal Box and the Level Crossing units.

Note 8 :

 This handbook is intended for System Designers and Maintainers and covers a

wide range of topics not covered by this handbook. The document is available ring bound or
on CD in Adobe Acrobat .PDF format.

4. OUTLINE DESCRIPTION

This is not a detailed description of the PETS 2 equipment, merely an outline account
aimed at describing the features relevant to installation. Installers who are familiar with the
original PETS equipment should read section 4.1 carefully.

Summary of Contents for PETS-2









































Reviews:

No comments

Brands by name

Popular brands

Load more brands