PETS-2 Crossing Telephone System
QUICKFIX INSTALLATION HANDBOOK
Page 25
of 40
Issue 2
13/12/99
25
5.7 Front panels
After re-installing the card frame into the case; fitting the Connection Plate, connectors and
Connector Retention bracket, the front panels may be replaced.
5.7.1 Signalbox front panel
Figure 5 - Signalbox Unit showing label inserts
The panel is to be labelled with the following information:
1. Maintainer contact information for fault reporting by the Signaller.
2. Location (in terminology used by the Signaller) of each Level Crossing supported by the
unit.
3. Identification of unused Line circuits (labelled ‘Not Equipped’)
A Word 6 document file is available with the labels already formatted and sized. This file
is available upon request by return of e-mail. Please request along with your name,
position, company and phone number to the following address:
Simply open the file in Word 6 and enter the correct details in the pre-formatted areas.
Print onto good quality Laser/ inkjet paper and cut-out the labels using scissors and the
black outline borders as a guide. Insert the labels into the ‘pockets’ at the top and right
Location label
Maintainer label
