White Magic PRO 1900, Owner'S Manual

Page: 36 / 90

25 HOURS OR WEEKLY
1. Grease both blower fittings located on top of the machine cover using a high tem-
perature NLGI #2 bearing grease. One shot per fitting. DO NOT OVER GREASE.
2. Remove the quick disconnect and clean the stainless steel inline filter in the
bypass solenoid assembly.
2. Check the Cat Pump oil level through sight gauge on rear of pump. Adjust as
necessary. DO NOT OVERFILL. Oil level must be midway between the red dot
and the top of sight glass. Slightly higher than the dot due to reverse rotation of the
pump.
FIRST 50 HOURS ONLY
1. Completely drain the Cat Pump oil shortly after machine operation. Replace with
new Cat Pump oil. DO NOT OVERFILL. Oil level must be midway between the
red dot and the top of sight glass. Slightly higher that the red dot due to reverse rota-
tion of the pump.
2. Completely drain the blower oil and replace with a premium grade,
non-detergent, with rust, oxidation, and foam inhibitors. DO NOT
OVERFILL.
Do not replace the ventilation plug with a non-vented plug
or serious blower damage will result .
EVERY 100 HOURS
1. Drain the engine oil and remove the oil filter. Replace with a new filter and fresh
new motor oil. Refer to the Ford owner’s manual for the proper
viscosity vs. temperature rated oils.
2. Check the governor oil level and adjust as necessary. Refer to the Ford
owner’s manual.
3. Check the fluid level of the battery. Recharge and/or top off with distilled
water as necessary.
MAINTENANCE SCHEDULE (continued..)
31