White Magic PRO 1900, Owner'S Manual

Page: 41 / 90

(1) - More frequent intervals may be required in dusty areas - 50 Hrs for oil and filter.
(2) - Mechanical Governor (Belt Driven)
(3) - Seasonal or as Required
(4) - If so Equipped
(5) - Replace worn, frayed, cracked, or damaged belts.
(6) - Replace governor belts every 24 months
(7) - Check engine coolant condition and protection, hoses and clamps annually - Prior to cold
weather
Note : Scheduled maintenance beyond 1000 hrs should be continued at the same intervals as
before.
Maintenance Schedule for Ford Engine (continued…)
Maintenance Instructions for Ford Engine
Initial Start-Up
Your ford industrial engine was inspected before leaving the factory. However, the initial
startup checks must be made before putting the unit into operation. The Preventative Mainte-
nance Schedule provides a handy checklist. Perform the initial startup operations in the se-
quence listed in the left-hand column.
Routine Service
Make sure your unit is ready to go whenever you need it. There are some things that you can
do, or have done, to be sure it is well cared for:
•
Make frequent checks of the engine oil and coolant levels.
•
Keep engine air filter clean
•
Watch the engine temperature
•
Watch engine oil pressure
Scheduled Preventative Maintenance
The operations listed in the maintenance schedule are covered in detail on the following pages.
Whenever your engine requires maintenance of any kind your Ford Power Products distributor
or dealer has skilled technicians who will do an expert job of keeping your engine in its prime
condition.
36